EncodeSolar

From site to solar design in minutes

EncodeSolar is the intelligent EPC design platform that connects every step, from site boundary to approved, build-ready output, without switching tools.

Rooftop C&I — solar project Demo site Save project
The EncodeSolar workspace: a rooftop layout in 3D, with configuration on the left and capacity, yield and monthly generation on the right Shadow simulation 3:00 PM 3D render2DSatellite
The challenge

One design change, a day of rework

A single commercial solar project takes your engineers through site constraints, panel layout, shading analysis, energy estimates, inverter sizing, BOMs and reports. Each step often lives in a different tool. Every design change means manual rework across all of them, and more room for error.

Site definition

Boundaries, obstacles and multiple buildings.

PV layout

Auto-placement, orientation and clearances.

Shadow and energy

Annual shading, yield and performance ratio.

EPC outputs

Inverter selection, material and electrical BOM, reports.

Six intelligent workflows

Every step, in one place

A rooftop solar layout in 3D: panel tables, walkways between blocks and
                    a plant room casting a shadow across the deck

Drag to turn

Shadow simulation 3:00 PM
Tables, walkways and clearances are placed automatically. Drag the roof to turn it, and move the slider to walk the sun across the shortest day of the year. The shade on each panel is traced from this roof’s own geometry; the weather is a clear-sky model rather than measured data, so the energy figures are illustrative.
  1. Define the site

    Draw building boundaries, place obstacles with their heights, and manage several buildings in one project.

  2. Automate PV layout

    Pick panels from the library and auto-place them with orientation control, clearances and walkways.

  3. Analyse shadows

    Model shading across the year, classify each panel, and see which panels to remove or move.

  4. Recalculate instantly

    Change any panel, and capacity, energy, inverter configuration and BOM all update automatically.

  5. Generate outputs

    Automatic inverter selection, material and electrical BOM, 3D visualisation and a 25-year projection report.

  6. Manage the project

    Approval workflows, task management and multi-building organisation in one place.

Change once. Everything updates.

The difference between a drawing tool and an engineering platform

In a traditional workflow, one design change sets off a chain of manual updates across tools. With EncodeSolar, you make the change, watch every output recalculate, then export and approve. No spreadsheets. No rework.

CHANGE ONE PANEL Layout Shading Energy Inverters BOM Report Every output downstream updates automatically. No spreadsheets, no rework.
What you hand over

One export, and the project is documented

Every design exports as a report your engineers, your client and the approving authority can all work from: the layout summary, a complete bill of materials, the electrical schedule, and the energy analysis behind it.

Total panels 913
System capacity 657.4 kWp
Walkway length 1,221 m
Panel wattage 720 W

Bill of materials

ItemQtySpecification
Solar panels913720 W each
Total capacity657.36kWp
String inverter2Grid tie, three phase
Short rails5,478pieces
End clamps3,652pieces
Mid clamps1,826pieces

Electrical bill of materials

Every component is listed by section, with quantities and run lengths, so procurement can price the job straight from the report.

  • ACDB Box, MCCB, busbar metres, CT and SPD
  • DCDB Combiner box, string MCBs, PV cable strings and metres, isolation switch, DC SPD, monitoring devices
  • Earthing Earth rods, conductor metres, connection lugs
  • Lightning Arrester, AC and DC SPDs, grounding lugs, cable metres
  • Comms Cat6 metres, RJ45 connectors, data logger, ethernet switch

Where no listed cable can carry the current within the allowed voltage drop, the report says so instead of quietly picking one — the run is flagged for resizing.

Energy analysis

Yield, month by month, for twenty-five years

Shading is modelled across the year, panel by panel, and rolled up into generation figures, a performance ratio and a lifetime projection with degradation.

Annual AC energy 1,021,096 kWh
Specific yield 1,553 kWh/kWp
Performance ratio 80.1%
CO₂ offset, 25 years 23,485 t
0k 30k 60k 90k 120k Jan: 77,437 kWh Jan Feb: 84,974 kWh Feb Mar: 104,343 kWh Mar Apr: 97,161 kWh Apr May: 104,999 kWh May Jun: 82,137 kWh Jun Jul: 91,406 kWh Jul Aug: 80,778 kWh Aug Sep: 83,385 kWh Sep Oct: 72,938 kWh Oct Nov: 84,674 kWh Nov Dec: 56,863 kWh Dec 104,999 kWh Expected monthly AC generation (kWh)

Also in the report

  • Solar access and irradiance, including how many panels fall below 80%
  • Month-by-month table of AC energy, specific generation, PR and plane-of-array irradiance
  • 25-year projection with year-on-year degradation and lifetime generation
  • Financial and environmental summary, with ROI once capex is entered

Export report (PDF)

One button at the end of a design. The same numbers the platform used, laid out for the client, the lender or the approving authority.

Figures on this page come from one sample EncodeSolar report and illustrate the format of the output. Yield depends on site, panel, orientation and weather.

Try it on your own projects

Don’t judge EncodeSolar by our demo

Our 30-day design partner pilot puts it in your engineers’ hands on real projects.

  • 2–3 of your engineers onboarded Guided setup for the people who will use it.
  • Up to 5 live projects Real sites, not sample data.
  • Support throughout WhatsApp and email access to our team.
  • Mid-pilot and final reviews Sessions to work through what you find.
  • A side-by-side comparison Your current workflow against EncodeSolar at the end.
Who uses EncodeSolar

Built for solar engineering teams

  • Solar EPC companies
  • Rooftop and commercial solar installers
  • Solar design and engineering consultancies

See it on a project you already know

We’ll handle the setup, support your first project and deliver a side-by-side comparison at the end.